How to Choose VCR High Pressure Threaded Hydraulic Quick Couplings for Demanding Applications
When a coupling has to hold on tipper trucks, trailers, agricultural equipment and construction plant — lines that see high pressure, high flow and a lot of field abuse — a VCR high pressure threaded hydraulic quick coupling is built for exactly that. It's a screw-to-connect design with a wing-nut sleeve you can tighten by hand, rated to 350 bar with a flat-face seal. Here's how to spec it for demanding work.

Where VCR earns its place
The VCR targets mobile and heavy plant: tipper trucks, commercial vehicle trailers, agricultural machinery and construction equipment. The wing-nut sleeve means a gloved hand can make the joint in the field without tools, and these high pressure hydraulic Quick Couplings tolerate up to 50 bar of residual pressure in the line. Bidirectional flow and a flat-face design that keeps fluid loss and air inclusion low are why they sit on machines connected and disconnected constantly.

Size and flow
VCR comes in two large-bore sizes: DN20 (3/4" BSP) and DN25 (1" BSP), carrying 120 and 160 l/min respectively, both at 350 bar working pressure — the figure to use when you set the hydraulic quick coupling working pressure for the circuit. These are bigger lines than the smaller threaded hydraulic quick couplings, so pick VCR when the circuit moves real volume, not just pressure.
Thread form: BSP, and check before a US build
The listed VCR sizes are BSP (3/4", 1" and 1-1/4" on the mating halves). BSPP is the norm across the UK and much of Europe, so that fits. For US builds needing NPT, confirm availability with the factory before you spec it — mixing thread forms is the usual leak cause.
![]() | ![]() |
Interchange and the male/female pair
VCR crosses with Faster CVE and Holmbury VCR series. For tractor parts distributors and OEM buyers holding legacy stock, that interchange matters more than the label. Note the male half has an external thread for bulkhead mounting — handy when the coupling sits on a panel. Each line needs one male and one female half at the same nominal size.
Seals by media
Standard NBR covers –25°C to +125°C for mineral oil. For wider ranges, FKM or EPDM are available on request, with a PTFE back-up ring behind the seal.
HL FLUID has made hydraulic quick couplings since 2010 and ships to 30+ countries, including the US, UK and Europe. Full dimensions sit on the VCR high pressure threaded hydraulic quick couplings page; for smaller-bore threaded work, the VEP threaded hydraulic quick couplings are the closer fit.
For high pressure hydraulic coupling selection across industrial hydraulic quick couplings, send HL FLUID your size, thread, pressure and application — we check matching, supply samples, and quote volume or OEM/ODM runs.
Talk to HL FLUID about pressure class, thread form and interface matching, or request a bulk or OEM/ODM quote:
- Email: sales@hlfluid.com
- Telephone: +8615128740096
- WhatsApp: +8615128740096

